Books On Reserve
The number One source for Library product solutions.

Makerspace Products

Zortrax Inventure with DSS Chamber

Zortrax Inventure with DSS Chamber


Zortrax Inventure with DSS Chamber

A dual-extrusion desktop 3D printer with Dissolvable Support System

Zortrax Inventure is a dual-extrusion LPD Plus 3D printer which can print high-temperature ABS-based filaments with PVA-based support material designed to work at temperatures reaching nearly 245° C (505° F). An enclosed, heated printing chamber significantly reduces ABS shrinkage and a built-in HEPA filter prevents fumes from getting out of the printing chamber. Combined with Zortrax DSS Station, a device for automatic soluble support removal, Zortrax Inventure allows for nearly hands-free 3D printing from start to finish. DSS Station circulates water at the right temperature to efficiently dissolve PVA support structures.

Zortrax Inventure features

· Dual-extrusion

· 3D prints high-temperature ABS-based filaments with PVA soluble support

· Enclosed, heated printing chamber

· Built-in HEPA filter

Zortrax DSS features

· Removes water-soluble support structures

· Easy to set up

· Works with all PVA water-soluble filaments

· No additional solvents needed

Dedicated model filaments:


Dedicated water-soluble support filaments: Z-SUPPORT and Z-SUPPORT Plus


Device features

Build volume: 135 x 135 x 130 mm (5.3 x 5.3 x 5.1 in)

Material container: Cartridge

Material diameter:1.75 mm (0.069 in)

Nozzle diameter: 0.4 mm (0.016 in)

Support Dissolvable – printed with a different material than the model

HEPA filter: Yes

Material detection sensor: Yes

Chip with information about material (type, color, consumption): Yes


Printing with the model and the support material


SD card (included)

Available materials

Model materials (Z-PETG, Z-PLA, Z-SEMIFLEX, Z-ULTRAT Plus) and support materials (Z-SUPPORT, Z-SUPPORT Plus)

Whats In the box?

3D printer, SD card, cartridge with model material, cartridge with support material, quick start guide, waste container, cartridge knob, power cable, build tray (spare), 5 build trays

DSS parameters

External dimensions (WxDxH)

235 x 238 x 295 mm (9.2 x 9.4 x 11.6 in)

Internal dimensions: 188 x 188 x 199 mm (7.4 x 7.4 x 7.8 in)

Working volume: 6 L (202.9 FL OZ)

Shipping box: 330 x 330 x 380 mm (13 x 13 x 15 in)

DSS weight: 8.4 kg (18.5 lbs)

Shipping weight: 9.5 kg (21 lbs)

Maximum working temperature: 75 °C (167 °F)

Maximum rotational speed: 220 rpm

AC input: 110 V ~ 9 A 50/60 Hz 240 V ~ 4.2 A 50/60 Hz

Maximum power consumption: 1000 W

Whats In the box DSS Station?

Rising basket, rubber gloves, brush, drain pipe, power cable, quick start guide



LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures

Layer resolution: 90-290 microns

Minimal optimal wall thickness: 800 microns

Minimal wall thickness: 400 microns

Resolution of a single printable point

X/Y axes: 400 microns Z axis: 90-200 microns

X/Y positioning accuracy: 1.5 micron

Z-axis single step: 1.25 micron

Maximum printing temperature (extruder): 310 ˚C (590 °F)

Heated chamber: Yes


Add To Cart